Make a Plastic Bottle Bird Feeder (Simple DIY Nature Project for Kids)

Plastic Bottle Bird Feeder

There’s something special about spotting birds in your own garden, especially when you’ve helped bring them there. Making a plastic bottle bird feeder is a simple way to reuse materials and attract more nature into your garden.

This hands-on STEM activity is quick to set up, fun to observe, and full of learning potential.

While the construction may need adult help, children can still take ownership of decorating the feeder, choosing birdseed, and observing the results.

What’s really great about building a DIY birdfeeder as an educational activity is that it can be easily accessed by people of different ages and abilities. For young children, simply building the feeder and observing how it attracts birds can be hugely rewarding on its own. Older children might delve deeper into learning about sustainability, ecosystems, biodiversity, specific bird types, and even climate change.

Putting our bird feeder together took around 20 minutes, but you might want to spend longer if you plan on decorating it.

Learning Opportunities

  • Learn the value of recycling and re-purposing materials.
  • Find out about different species of birds and their impact on the ecosystem.
  • Use simple birdwatching to build focus, curiosity, and connection with nature.
  • Learn how humans can help care for the environment.

Making the Bird Feeder

What You’ll Need:

  • A clean, empty plastic bottle. (We used a 500ml one, but a big 2-litre bottle would work if you want a really big feeder)
  • A couple of sticks/dowels (for the perches)
  • Scissors (grown-up job!)
    A small pair of nail scissors works well for this craft.
  • String/Twine
  • Bird seed
  • Paints for decorating (optional)
Materials Needed

Before you start, make sure your empty bottle is clean and dry.

Step-by-Step

A note on safety: The cutting-out and hole-making on this task is quite fiddly, and should be done by a responsible adult.

Using your scissors, make two small holes on opposite sides near the bottom of your bottle.
Push a stick or dowel all the way through. This will become the lower perch.

Poke a Hole for a Perch

Repeat the process halfway up the bottle, this time at a 90° angle to the first stick. This gives birds more options and helps to balance the bird feeder.

A few centimetres above each perch, cut a small hole just big enough for a bird to access the seed. Don’t make it too large or the seed will fall out.

Using the scissors, poke two more holes near the neck of the bottle, so that we can hang the birdfeeder.

Thread some string or twine through these two holes and tie a knot. Leave enough slack to hang it in place securely.

String for Hanging the Bird Feeder

Fill the bottle with birdseed. It can be handy to use a small funnel so they don’t spill everywhere (or a cone made from paper).

Finally, hang your feeder in place, ideally 6-7 feet off the ground.

That’s it! Sit back and wait for the birds to arrive. It might take them a few days to find it, so be patient.

Filling & Hanging Our Bird Feeder

Homemade Bird Feeder FAQs (Design, Safety & Set-Up Tips)

Where Should I Position My Bird Feeder?

Place the bird feeder in a quiet, sheltered area to protect it from strong winds and to provide birds with a safe place to feed. Make sure it’s high enough to be out of reach of any predators, such as cats. We placed ours around 6-7 feet from the ground. Find a spot that has good visibility from your window, allowing you to observe the birds from indoors.

Make sure it’s visible from indoors, so that you can watch the birds, but not too close to windows, as birds may accidentally fly into them.

Does It Matter What Kind of Bird Seed I Use?

Yes! Check the labels on the birdseed before you buy. You’ll notice that different mixes attract different species of birds. The RSPB website has a great bird food buying guide.

Do Bird Feeders Need Cleaning?

Yes. We empty ours every week or so and scrub it with hot, soapy water. We rinse it and make sure it’s completely dry before adding more seeds.

Should I Decorate My Bird Feeder?

Making it look nice is a great idea, but use non-toxic materials and paints. Avoid paints that might flake off (waterproof acrylics are usually fine).

How to Keep Bird Seed Fresh in a Plastic Bottle Feeder

To prevent mould and keep the bird seed dry, make a few small drainage holes in the bottom of your plastic bottle bird feeder. This allows rainwater to escape while keeping the inside dry. Just be careful not to make your holes too big or the seed may fall out!

Do Bird Feeders Attract Rats?

Rats and mice can be attracted to seeds that fall to the ground from the bird feeder. To avoid these and other scavengers, sweep up any dropped seed beneath the feeder regularly. Better still, attaching a small tray underneath can help catch stray seeds and keep your garden tidy. This could be as simple as a plastic plant pot tray or a recycled plastic lid attached to the bottom of the bottle with a glue gun.

Opportunities For Additional Learning (Extension Tasks)

  • Start a bird-watching journal and track which birds visit your garden.
  • Try making different-sized feeders to attract a variety of birds. Smaller perches will suit small birds, and larger ones will accommodate bigger species of birds.

Wrapping Up

Aside from being a simple, fun activity for a rainy afternoon, making a bird feeder can be hugely rewarding from an educational point of view. It helps to nurture a sense of curiosity and responsibility for our natural environment. Bird feeders also encourage children to learn about different bird species and understand their role within ecosystems. The activity also helps to highlight the importance of sustainable practices and responsible environmental stewardship, making it a really valuable educational exercise.

Websites like the RSPB (Royal Society for the Protection of Birds) and The Woodland Trust are excellent resources on bird species and their habits, as well as lots of tips and advice for attracting and caring for them.